
Thin Brick Exterior, Precast Stone & Summer Kitchen in Winter Park, FL
A full exterior in thin brick, precast stone, and hand-laid arches that gives a Comstock Park home the architecture it was missing
This home sits in Comstock Park, a few streets from the oldest part of Winter Park. It was built in 2000 with a stucco exterior that never quite matched its surroundings. On a home designed by WYC Designs, we clad every elevation in thin brick and built the stone detailing that frames its openings. The cream finish came later, applied by the painting trade to a color chosen as part of the design.
Thin brick is what makes this possible on a house that was never designed for masonry. It carries the same face and hand-laid coursing as full brick without the footing and structural work a full wythe would demand. Every course, corner, and arch was still laid by hand, one brick at a time.
Precast stone does the rest. Sills under every window, caps on the porch pillars, and an arched surround that frames the front door. Out back we built a summer kitchen into the same brick, so the outdoor space belongs to the house rather than sitting beside it.
Home design by WYC Designs
Landscape design by William Thomas Design
Masonry installation and detailing by Palm Masonry.


Brick, precast stone, and outdoor masonry across one exterior.
Full Thin Brick Exterior
Every elevation clad in thin brick with hand-laid coursing and brick archways set over the openings.
Precast Stone Pillars, Sills & Arched Entry
Precast stone sills at every window, caps on the porch pillars, and an arched surround that frames the front door.
Built-In Summer Kitchen
An outdoor kitchen built into the same brick as the house, with granite counters, a full grill run, and copper lanterns.
Built Through Proportion, Material, and Detail
01. Material Selection
Thin brick chosen for size, texture, and coursing so the masonry carries the proportions of the house across every elevation.
02. Surface Preparation
Existing stucco assessed and prepared with moisture barrier, lath, and scratch coat so the brick is built to last on a house not designed for it.
03. Layout & Composition
Course lines, arch spans, sill heights, and pillar proportions planned across all four elevations so the openings align and the facade reads as one.
04. Mortar & Finish Detailing
Hand-tooled joints and hand-cut arches worked so the brick holds its texture and shadow across the facade.
Design-Led Masonry Throughout Central Florida
Palm Masonry is a design-led masonry studio based in Winter Park. Our owner is a second generation mason whose family work stands across much of this town, and that history is why we start with proportion and architecture rather than square footage. We design and build brick and stone exteriors, precast detailing, arched entries, fireplaces, and outdoor kitchens throughout Winter Park, Maitland, Orlando, Baldwin Park, College Park, Winter Garden, Lake Nona, Longwood, and the surrounding Central Florida communities.
WINTER PARK • MAITLAND • ORLANDO • BALDWIN PARK • COLLEGE PARK • WINTER GARDEN • LAKE NONA • LONGWOOD
Can you put brick on a house that was originally stucco?
Yes. This home was built in 2000 with a stucco exterior. We prepared the existing walls with a moisture barrier, lath, and scratch coat, then clad every elevation in thin brick. Done correctly it is permanent, and it is the cleanest way to bring real masonry to a stucco house.
What is thin brick and how is it different from full brick?
Thin brick is real kiln fired brick cut to a veneer profile. It gives you the same face, coursing, and hand-laid character as full brick without the footing and structural support a full wythe requires. On a retrofit like this one it is usually the right answer.
Did Palm Masonry paint the brick?
No. We laid the brick, built the arches, and set the precast stone. The house was painted afterward by the painting trade, to a color developed with the designer.
What precast stone was used on this project?
Precast stone sills under every window, caps on the porch pillars, and an arched surround at the front entry. Precast gives the openings definition and a lighter tone against the brick, which is what keeps a full brick facade from reading flat.
Are the brick archways laid by hand?
Yes. Each archway is laid course by course so the joints radiate correctly across the span. Arches are the least forgiving part of any brick job. There is no correcting one after the mortar sets, which is why they are the first thing a mason looks at.
How long did this project take?
Over a month of continuous work. A full exterior in thin brick with arch detailing, precast stone, and a summer kitchen is not a quick job, and the detail work is most of it.
Did you build the summer kitchen as well?
Yes. The summer kitchen was built into the same brick as the house, with granite counters, a full grill and prep run, and copper lanterns flanking the cook space. It belongs to the architecture rather than sitting beside it.
Does thin brick hold up in Florida?
It does, when the wall behind it is built right. Drainage plane, moisture barrier, and flashing matter more than the brick itself. Most failures people blame on brick are really failures in the assembly behind it, which is where we spend our preparation time.
Who designed the project?
WYC Designs designed the home. Palm Masonry built the masonry: the thin brick exterior, the precast stone pillars, sills, and arched entry, the brick archways, and the summer kitchen, along with the detailing that work required.
What makes Palm Masonry different from other masonry contractors?
We are a design-led masonry studio rather than a production installer. Our owner is a second generation mason, and his family has built masonry across much of Winter Park. That history is why we start with proportion, material, and how the work meets the architecture.
Do you work with designers and builders?
Regularly. On an exterior of this scope the masonry touches the openings, the entry, the porch, and the outdoor living spaces, so it works best when we are in the conversation while those are still being drawn.
Can Palm Masonry do similar work on my home?
Absolutely. Palm Masonry designs and builds thin brick and full brick exteriors, precast stone detailing, arched entries, fireplaces, and outdoor kitchens throughout Winter Park and Central Florida. Get in touch to talk through your project.